Do you want to buy the best frost protection available on the market these days? Do you have questions about buying the best of the millions of options available? Are questions and doubts about pipe protection against frost driving you crazy? If so, you should look for answers to the various questions, some of which are listed below:
- Why should you buy pipe protection against frost?
- How to buy the best frost protection pipes?
- What to look for in the best frost protection pipes before making a purchase?
- What is the best frost protection pipe available on the market?
- Which frost protection product proves to be the best combination, value for money?
- What makes this frost protection pipe the best in 2020?
The questions are many, but important; therefore, experts recommend is to research well on reliable online sources before making a purchase. Don’t let confusion disappoint your decision, and don’t let the name or brand dominate your purchase. Company can say this because they have experienced this situation by doing product reviews and buying guides for this frost protection for pipes.
To achieve adequate frost protection, it is recommended to thoroughly clean the sprinklers before the watering season begins.
Those farmers who plan to irrigate when nighttime temperatures drop below freezing should drain the center pivot irrigation system early to maintain adequate frost protection and prevent extensive ice damage (damage that does not usually covers insurance).
Keep in mind that all manufacturers recommend that sprinklers not be used with temperatures below -2ºC, but if farmers decide to use them below that temperature, they should carry out some checks to control frost and detect possible leaks. At -2ºC and with a wind of 16 km / h, the thermal sensation will lower the temperature further and freezing will begin.
With downspouts, there are sprinklers that are damaged by ice buildup that causes them to fall. Installed above, ice forms on top of the machine due to the water that continues to spray the sprinkler.
If a sprinkler freezes, it is recommended that farmers do nothing with the machine, simply let the ice melt and then, if the problem persists, contact their repairer. Attempting to repair without proper knowledge can worsen the condition of the sprinklers.
When temperatures are low, farmers should not use sprinklers as they would in the summer. The central pivot riser pipe must be drained or it will retain water, which could then freeze and break. Also check the automatic drainage of each tower, since if they are not completely drained, they can clog and freeze, causing the pipe to end up bursting, which would be a very expensive repair.
Frost protection: how to fight them
Before starting the irrigation season, a series of maintenance and cleaning tasks must be carried out that will save the machines time, money and water, and will improve the final result of the crops as they will achieve greater protection against frost.
Check transmission elements, nozzles and diffuser plates
When they occur at -6ºC at night and 15ºC during the day, condensation usually accumulates inside the transmission elements, which oxidizes the bearings. Farmers should make sure to drain the water and check the oil in the reducers.
It is essential to check the water diffuser plates and the nozzles, since they can be worn by sand and wind. This is an important point, as it affects the pressure of the sprinkler. The sprinkler must be used at the correct pressure. Overpressure is preferable to working with a lower pressure than necessary. Pressure is known to be low when there are gaps in the spray pattern as the sprinklers should overlap each other as they spray.
Inspect machine for leaks and check tire pressure
This point is easy to check and will also affect the pressure of the sprinkler if it is not repaired. For example, a 10 nozzle, with 1 Bar pressure, may be leaking up to 0.19 liters per second, and if leaking, it may leak up to 0.95 liters per second. That may be the difference between working with the right pressure or the wrong pressure.
The recommended tire pressure is different depending on the type of soil and the wheel model. On sandy soils, 11.2 × 24 tires are often recommended, while on heavier, clay-type soils, 11.2 × 38 tires work best.
Visit our other website https://ignitedigital.com/toronto-seo-search-engine-optimization/. It provides all types of digital marketing services.