How to Keep Home Safe with Concrete Care Tips to Prevent Floor Damage

Many home and business owners love the concrete floorings. They are exceptional in terms of strength that match with superb aesthetics. 

Concrete easily adapts to any environment and any theme in your property. However, as time goes by, concrete wears down. Cracks and random spalls will benign to show on the surface. 

You can save lots of resources if you know some basics when it comes to concrete care. Cleaning and maintenance is a breath of fresh air. Knowing the right tools and prep handling them will make a big difference. According to Forbes magazine, practical solutions are enough to increase a home’s resell value if you plan to do so in the future. So, start with essential flooring maintenance.

Hop on to today’s post—Strap-on your carpentry belts and note these simple tips to prevent concrete from severe damages.

1- Know the Common Signs of Concrete Floor Failure

A wise homeowner pays keen attention to signs of minor flaws on the concrete. It will not leave the knit-picky mom or dad at ease if thin cracks or hair-like creases are looming on the floor. They get into action and look for reasons for the faults. This way, they also seek first aid to cover-up flaws and recover a seamless polished floor surface.

Here are common signs to watch out if the flooring surfaces need minor repair or repolishing with this first tip.

  • Crumbs of concrete seem to fill the surface. 
  • Spider-web-like patterns crawl on the floor, and they seem to increase over the years.
  • Color fading. It means that the sealer might be thinning and needs resealing.
  • The concrete floor looks like it grows scales. These are chipping layers of the top surface of the floor. It may also tell you that a major repair is ahead.

Tip: After you get yourself familiar with these faulty concrete signs. Do not hesitate to ask a local floor contractor for some guide. They will show you tried and tested hacks on how to prevent damages to concrete. Moreover, prevent these from turning to a worst-case scenario. 

2- Know Basic Preparation

Cut the complexities of caring for your flooring surfaces. The steps you walk on can retain its good, well-kept condition with just quick and easy fixes.

Take note of these bits of advice from the experts of the epoxy flooring contractor in Phoenix. They always recommend their clients to perform grinding or sanding before heading on with resealing. 

It might be your driveway or garage area that needs some redo. An old coating can cause poor sealing of the new coat when the surface did not rid its old skin. 

Tip: Deglossing before coating will provide adequate adhesion with the new ones. So, better prepare the floor.

3- Know Your Surroundings Get Familiar with the Ground Condition

For this next tip, know some of the crucial factors that influence the condition of the floors. These include weather, soil moisture, location, and area size. 

If you decide to polish your concrete floors with protective sealers, you need first to note the factors mentioned above. Doing so will guide you in choosing the right type of concrete sealer. 

Tip: If you plan to seal the floor with epoxy reason coating, make sure that the area will fit the product. Outdoor floors will not work with epoxy resin alone. Acrylic-based sealers will give the protection of the exterior floors from the heat of the sun. 

Before sealing, make sure that indoor concrete floors are fully dry and there is no moisture present. Get rid of moisture. Lingering water droplets are the primary cause of faulty flooring installation.

4- Know Essential Steps

For polishing, resealing, or quick recoloring on concrete, there are always essential steps to follow. Most owners will jump into sealing or resurfacing the concrete without prior knowledge of other necessary steps. 

Concrete got joints. These are narrow, deep gaps that exist to give the structure enough space for contraction or expansion. The joints help prevent the concrete from cracking. When heat and cold take turns, it causes a change in the concrete’s density. 

Tip: Seal the joints. Make sure if you ask an expert installer that they follow this necessary process. Sealing the joints prevents water from escaping the surface and flow inside the substrate. If you will be able to have this work, then your concrete is safe. Your homes, too. The steps will be safe to walk on, free from any trip and slip hazards.

Wrap Up

Prevention is always better than facing bigger problems. This old saying goes the same for your floors. These are just three simple tips for you to remember. Nothing complicated. So, begin practicing these simple steps and prevent complicating any of your flooring woes.

Leave a Reply