MITER SAW PRO TIPS & TRICKS—-make better use of your tool

A miter saw is a handy tool for people of all skill levels. The quality of cutting achieved with a miter saw is matchless to any of the tasks done manually. This chop saw comes in handy whether you are making miter cuts or bevel cuts. As a DIYer, one of the many skills you should possess is learning using a miter saw. Knowing about this power tools can eliminate the need to use bigger tools like a table saw when working on your projects.

Let’s know the witchcraft

Cleaning the boards

Startyour workby finding the best boards for your project. Most often, you won’t find panels in ready-to-use form. They might be lying carelessly in the lumberyard or mishandled by the customers in the exact search as you are—– finding the best quality boards for their woodworking. The most common problems you might see are the chipped or splintered ends. Otherwise, the boards might have cuts running down their ends, covering few inches.

Even if everything works great at the ends, you can never risk the perfect squaring of the ends. Never assume that they are perfectly cut. So, as a precaution, always chop off some part of the board with your miter saw to get perfectly leveled ends. The appropriate manner to get rid of the faulty wood is by cutting to the point where the split ends.

Make a miter saw more efficient—-use stop blocks

Finding the best miter saw is just one step; using it like a pro is what garners value from your purchase. If you are new to operating a miter saw or want to enhance the quality of cutting for your upcoming woodworking project, follow these tips and tricks to get the best out of your miter saw for beginners. These techniques will help you get more from your tool right from the beginning, and no experience necessary.

One way of making a miter saw more effective in cutting is the use of stop blocks. Often you are cutting multiple pieces together in your woodworking projects. The practice not only saves time but it helps you achieve accurate measurements in all parts as well.

Setting a stop block can work great for you when working with a miter saw. The stop block will take a few minutes to set up. Measure the length you want to achieve with your cutting and clamp a piece of wood against the fence. Now you can support your workpiece against the stop block on the miter table and achieve accurate cuts through all the pieces.

Extend your fence

Not all the time, you will be working with boards that are equal to the length of your fence. What if you require to cut bigger boards? There won’t be any way to fit a block in the air beyond your fence. The most common technique to eliminate this limitation is extending your fence with a wood board. Attach a long straight board and fix it to the fence with the screws.

There are holes at the back of the fence for this purpose. Make sure to fix the board in two places. Ensure the length of the screws is smaller than the board’s width, so they don’t come out from the other side. Now you can clamp your stop block along with the board wherever you want and cut the desired lengths.

Improve the table—- zero clearance table

As you improved the small fencing of your miter saw, you can improve the table of the miter saw as well. If you recently bought your miter saw, you will see a plate already in place with a wide throat where the blade goes while making bevel cuts. The wide throat can cause the smaller wood pieces to drop into it, or else you may experience splintering.

A simple technique before fixing your additional fence can help you achieve yourzero clearance table design. Take a scrap sheet of plywood and place it on the table before placing the wooden fencing board. Later you can put the fence and fix it with screws. In this way, both of your pieces are in place.

Cutting smaller pieces

The following technique is an essential safety technique as well. When you are cutting smaller pieces, there is always a safety hazard involved. For instance, you might be cutting dowel pins. It might be okay when you are making them out of a long narrow wooden cylindrical rod. But once it gets shorter than 2 inches or less, don’t take your finger near to the blade. Always use an aid.

The most intuitive aid that you can easily find in your woodworking shop is a pencil with an eraser on the other side. The pencil is long enough to keep your fingers away, and the eraser can cause friction and hold the pieces in place.

Mind the thickness of the Kerf

As a beginner miter saw user, you might ignore the thickness of the Kerf when you are cutting through a wooden board. The thickness of the Kerf is actually the thickness of your blade. The most common mistake of a woodworker is to cut through the middle of the line. This can leave your workpiece 1/16 inch shorter than the required length when not considering the material removed with the Kerf.

Before cutting, make a line with the tape measure and always cut while keeping the cut-line on the outside. This way, the line on your workpiece will remain intact, and the Kerf will remove the material from the cutoff side of the wood. These slight differences can immensely impact the accuracy and success of your project when you fail to fit the pieces together.

Conclusion

Whether woodworking is your hobby or you are a seasoned professional, you can never deny the importance of some quick tips and techniques.

These simple tips can elevate the quality of your work exponentially. If you have been working with a miter saw for a long time, you might also have some of your personal techniques and shortcuts discovered over time.

Often, they can help you eliminate the need to buy new tools for additional work. Make sure to share your own woodworking techniques to help your woodworking community.

Leave a Reply